Veterinary Patient Warming System for Surgery, Anaesthesia & Recovery

Forced-air patient warming system with 32–45 °C temperature control, nine airflow levels and expanded monitoring for veterinary perioperative care.

Key Benefits

01
32–45 °C Temperature Control

Adjustable warming range for different clinical requirements

02
9 Airflow Levels

Selectable airflow from 25 m³/h to 90 m³/h

03
Touchscreen + Physical Buttons

Flexible control through an LCD touchscreen and physical controls

04
Multiple Safety Alarms

Expanded monitoring for temperature, heater, fan and sensor conditions

Veterinary Patient Warming System

More Control Over Veterinary Patient Warming

This veterinary patient warming system is designed to support perioperative temperature management during surgery, anaesthesia and postoperative recovery.

It delivers controlled warm air through compatible warming blankets to help maintain patient normothermia and reduce the risk of hypothermia-related complications during veterinary clinical care.

Why This Model?

Adjustable Temperature Control

The system provides a temperature control range of 32 °C to 45 °C, allowing the warming level to be selected according to the patient and clinical requirement.

Nine Airflow Levels

Nine selectable airflow levels from 25 m³/h to 90 m³/h provide a broader range of warming settings for different clinical situations.

Touchscreen + Physical Controls

An LCD touchscreen combined with physical buttons provides an intuitive operating interface, while an optional remote control function is available for added convenience.

Expanded System Monitoring

Start-up self-check automatically verifies alarm functions before operation. Multiple safety alarms monitor over-temperature, low-temperature, high-temperature, heater failure, fan failure and temperature sensor failure.

Built Around Veterinary Perioperative Care

Surgery & Anaesthesia

The system supports temperature management during veterinary surgical and anaesthetic procedures, when maintaining patient temperature is an important part of perioperative care.

Postoperative Recovery

Controlled warm air can continue to support patient warming during recovery following surgical intervention.

Veterinary Hospitals & Referral Centres

The combination of adjustable temperature, nine airflow levels and expanded monitoring makes the system suitable for veterinary hospitals, referral centres and clinics requiring a more configurable warming solution.

Warming Blanket Options

The system is compatible with both single-use and reusable patient warming blankets.

Single-use Blankets

  • High-quality non-woven fabric
  • Tear-resistant and water-resistant properties
  • Micro-perforated surface for even warm-air distribution
  • Universal air inlet design compatible with most patient warming systems
  • Common veterinary blanket size: 100 cm × 70 cm

Reusable Blankets

Reusable blankets are designed for repeated clinical use and support washing and steam autoclave sterilisation.

Under proper reprocessing conditions, reusable blankets can be used for at least 50 cycles.

Filter Options

Two filter options are available:

  • 0.5 μm sponge filter
  • Optional 0.2 μm HEPA filter

What Makes This Configuration Different?

The Veterinary Patient Warming System provides a wider adjustable temperature range, nine airflow levels and expanded control and monitoring functions.

For a more compact configuration with five preset temperature settings and three airflow levels, see the Veterinary Air Warming System for Small Animals.

FeatureVeterinary Patient Warming SystemVeterinary Air Warming System
Temperature control32–45 °C5 preset settings
Airflow control9 levels3 levels
DisplayLCD touchscreen + physical buttonsOLED
Temperature accuracy±1.0 °C±1.5 °C
Safety monitoringMultiple safety alarmsOver-temperature and under-temperature alarms
Filter options0.5 μm sponge / optional 0.2 μm HEPAFilter status monitoring and maintenance alert

Technical Specifications

SpecificationDetails
Temperature Control Range32 °C – 45 °C
Temperature Accuracy±1.0 °C
Airflow Control9 selectable airflow levels from 25 m³/h to 90 m³/h
Air PressureMore than 2,600 Pa at maximum airflow level
Heating TechnologyPTC ceramic heating and forced-air technology
Heating PerformanceApplied parts can be heated from 23±2 °C to 37 °C within approximately 2–5 minutes under proper heat dissipation conditions
DisplayLCD display with touchscreen control and physical buttons
Safety FunctionsOver-temperature, low-temperature, high-temperature, heater failure, fan failure and temperature sensor failure alarms
Timing FunctionsCountdown timer, real-time operation time display and cumulative operation timer
Filter Options0.5 μm sponge filter or optional 0.2 μm HEPA filter
Noise LevelBelow 51 dBA depending on airflow setting
Hose Length180 cm
Dimensions254 × 319 × 374 mm
WeightApproximately 7 kg
Power Supply220–230 VAC, 50/60 Hz, 6.5A
Power ConsumptionPeak 1495 VA; Average 800 VA
ClassificationEU MDR Class Ib; IEC 60601-1 Class I; Type BF applied part; Continuous operation; IPX1
Operating ConditionsTemperature +10 °C to +40 °C; Relative humidity 30–75%; Atmospheric pressure 700–1060 hPa

A Good Fit For

This configuration is particularly suited to veterinary facilities looking for:

  • A forced-air warming system with a wider adjustable temperature range
  • More granular airflow adjustment
  • Touchscreen and physical control options
  • Expanded safety monitoring
  • Compatibility with single-use and reusable warming blankets
  • A configurable warming solution for surgery, anaesthesia and recovery

FAQ

What is the difference between this model and the Veterinary Air Warming System for Small Animals?

The Veterinary Air Warming System for Small Animals uses five preset temperature settings and three airflow levels in a compact configuration. This model provides a 32–45 °C adjustable temperature range, nine airflow levels, touchscreen control and additional monitoring functions.


See the Veterinary Air Warming System for Small Animals for a detailed comparison.

Can this system be used during veterinary surgery and anaesthesia?

Yes. It is designed for perioperative patient warming during veterinary surgery, anaesthesia and postoperative recovery.

What types of warming blankets are compatible?

The system supports both single-use and reusable warming blankets. Single-use blankets use a universal air inlet design compatible with most patient warming systems, while reusable blankets support washing and steam autoclave sterilisation.

How many airflow levels are available?

There are nine selectable airflow levels, covering a range from 25 m³/h to 90 m³/h.

Does the system have safety alarms?

Yes. The system includes alarms for over-temperature, low-temperature, high-temperature, heater failure, fan failure and temperature sensor failure. A start-up self-check also verifies alarm functions before operation.

Is a HEPA filter available?

Yes. A 0.2 μm HEPA filter is available as an option in addition to the standard 0.5 μm sponge filter.

Why Choose AquaPlat

For veterinary distributors and professional users, AquaPlat provides:

✓ Product options aligned with specific market and customer requirements
✓ Technical documentation and product information
✓ Support in comparing configurations and product options
✓ OEM branding support where applicable
✓ Reliable manufacturing and supply coordination

Whether you are expanding your veterinary equipment portfolio or looking for an additional supplier option, we can help you evaluate suitable products for your market and requirements.

Request A Quick Quote

Get a tailored response within 1 working day.
Please check your inbox for an email from marina@aquaplat.com.

Prefer WhatsApp? +86 191 2421 9461