Forced-air patient warming system with 32–45 °C temperature control, nine airflow levels and expanded monitoring for veterinary perioperative care.
Adjustable warming range for different clinical requirements
Selectable airflow from 25 m³/h to 90 m³/h
Flexible control through an LCD touchscreen and physical controls
Expanded monitoring for temperature, heater, fan and sensor conditions
This veterinary patient warming system is designed to support perioperative temperature management during surgery, anaesthesia and postoperative recovery.
It delivers controlled warm air through compatible warming blankets to help maintain patient normothermia and reduce the risk of hypothermia-related complications during veterinary clinical care.
The system provides a temperature control range of 32 °C to 45 °C, allowing the warming level to be selected according to the patient and clinical requirement.
Nine selectable airflow levels from 25 m³/h to 90 m³/h provide a broader range of warming settings for different clinical situations.
An LCD touchscreen combined with physical buttons provides an intuitive operating interface, while an optional remote control function is available for added convenience.
Start-up self-check automatically verifies alarm functions before operation. Multiple safety alarms monitor over-temperature, low-temperature, high-temperature, heater failure, fan failure and temperature sensor failure.
The system supports temperature management during veterinary surgical and anaesthetic procedures, when maintaining patient temperature is an important part of perioperative care.
Controlled warm air can continue to support patient warming during recovery following surgical intervention.
The combination of adjustable temperature, nine airflow levels and expanded monitoring makes the system suitable for veterinary hospitals, referral centres and clinics requiring a more configurable warming solution.
The system is compatible with both single-use and reusable patient warming blankets.
Reusable blankets are designed for repeated clinical use and support washing and steam autoclave sterilisation.
Under proper reprocessing conditions, reusable blankets can be used for at least 50 cycles.
Two filter options are available:
The Veterinary Patient Warming System provides a wider adjustable temperature range, nine airflow levels and expanded control and monitoring functions.
For a more compact configuration with five preset temperature settings and three airflow levels, see the Veterinary Air Warming System for Small Animals.
| Feature | Veterinary Patient Warming System | Veterinary Air Warming System |
|---|---|---|
| Temperature control | 32–45 °C | 5 preset settings |
| Airflow control | 9 levels | 3 levels |
| Display | LCD touchscreen + physical buttons | OLED |
| Temperature accuracy | ±1.0 °C | ±1.5 °C |
| Safety monitoring | Multiple safety alarms | Over-temperature and under-temperature alarms |
| Filter options | 0.5 μm sponge / optional 0.2 μm HEPA | Filter status monitoring and maintenance alert |
| Specification | Details |
|---|---|
| Temperature Control Range | 32 °C – 45 °C |
| Temperature Accuracy | ±1.0 °C |
| Airflow Control | 9 selectable airflow levels from 25 m³/h to 90 m³/h |
| Air Pressure | More than 2,600 Pa at maximum airflow level |
| Heating Technology | PTC ceramic heating and forced-air technology |
| Heating Performance | Applied parts can be heated from 23±2 °C to 37 °C within approximately 2–5 minutes under proper heat dissipation conditions |
| Display | LCD display with touchscreen control and physical buttons |
| Safety Functions | Over-temperature, low-temperature, high-temperature, heater failure, fan failure and temperature sensor failure alarms |
| Timing Functions | Countdown timer, real-time operation time display and cumulative operation timer |
| Filter Options | 0.5 μm sponge filter or optional 0.2 μm HEPA filter |
| Noise Level | Below 51 dBA depending on airflow setting |
| Hose Length | 180 cm |
| Dimensions | 254 × 319 × 374 mm |
| Weight | Approximately 7 kg |
| Power Supply | 220–230 VAC, 50/60 Hz, 6.5A |
| Power Consumption | Peak 1495 VA; Average 800 VA |
| Classification | EU MDR Class Ib; IEC 60601-1 Class I; Type BF applied part; Continuous operation; IPX1 |
| Operating Conditions | Temperature +10 °C to +40 °C; Relative humidity 30–75%; Atmospheric pressure 700–1060 hPa |
This configuration is particularly suited to veterinary facilities looking for:
The Veterinary Air Warming System for Small Animals uses five preset temperature settings and three airflow levels in a compact configuration. This model provides a 32–45 °C adjustable temperature range, nine airflow levels, touchscreen control and additional monitoring functions.
See the Veterinary Air Warming System for Small Animals for a detailed comparison.
Yes. It is designed for perioperative patient warming during veterinary surgery, anaesthesia and postoperative recovery.
The system supports both single-use and reusable warming blankets. Single-use blankets use a universal air inlet design compatible with most patient warming systems, while reusable blankets support washing and steam autoclave sterilisation.
There are nine selectable airflow levels, covering a range from 25 m³/h to 90 m³/h.
Yes. The system includes alarms for over-temperature, low-temperature, high-temperature, heater failure, fan failure and temperature sensor failure. A start-up self-check also verifies alarm functions before operation.
Yes. A 0.2 μm HEPA filter is available as an option in addition to the standard 0.5 μm sponge filter.
For veterinary distributors and professional users, AquaPlat provides:
✓ Product options aligned with specific market and customer requirements
✓ Technical documentation and product information
✓ Support in comparing configurations and product options
✓ OEM branding support where applicable
✓ Reliable manufacturing and supply coordination
Whether you are expanding your veterinary equipment portfolio or looking for an additional supplier option, we can help you evaluate suitable products for your market and requirements.






Get a tailored response within 1 working day.
Please check your inbox for an email from marina@aquaplat.com.
Prefer WhatsApp? +86 191 2421 9461